RPO 'L-HD' Launch Box

next >  • index •  < previous Cutting the 2"x4" and 2"x8" Studs
Launch Box, Grind Box, Skate Box

Make a mark at 45". This length is the width of the box (48") minus the width of the two 2"x6" supports (1.5" + 1.5" = 3"). For ramp building in general, you will use a lot of studs at 45" for framing, and 46.5" for transitions (46.5" = 48" - .75" - .75" when using 3/4" Plywood templates).

RPO Launch Box, Grind Box, Skate Box Diagram tear

Jump to a Section: