RPO 3' Driveway Quarter Pipe

next >  • index •  < previous Drawing and Cutting Transition Templates
Quarter Pipe

With all the pencil marks made, slide the 3/4" plywood up onto an impromptu cutting platform using 2' x 4" studs. Move the studs around so you can begin cutting out the curve and deck. You will probably have to stop cutting and re-adjust the supports once or twice. Use your jig saw to cut out the curved portion, then either your jig saw again or your circular saw to make the straight cuts. Refer to the diagram below.

Drawing and Cutting Transition Templates tear

Jump to another Category